There will be some common problems during the use of the drawing die! These problems are not caused by the drawing die itself, but are often caused by external force interference such as manpower and touch! Therefore, regular maintenance will help the accuracy of the quality of the products it produces to maintain a very high level!

 During the use of the working cone, the angle was not adjusted properly due to the placement of the wire! In this way, irregularities and burrs will appear when the wire is stretched by the wire drawing die. If it is too close to the sizing belt, the diameter of the wire will be reduced! The specifications of the wire are released and changed! After it is deformed, it will not only affect the accuracy of the drawing die, but also greatly affect the product!

  The core fracture of the drawing die is also a common situation! everybody knows. The core of the drawing die is usually made of highly wear-resistant diamond, and its hardness is very strong! Therefore, it is very strong, and it is not easy to deform when used! However, after a long time of use, due to excessive wear, it is easy to cause herringbone cracks in his core. Another reason for this wear is that the arrangement is unreasonable, because the drawing die will be arranged before the drawing is carried out. Diameter and accuracy and direction! If you receive interference from external forces, these factors will change! In the process of use, it will cause the wear and tear of the mold core! Therefore, be sure to carefully check whether the data settings are reasonable before use

 Another phenomenon is the hardening of the surface of the drawing die! Its hardening phenomenon is due to the residue left in its processing, which can cause the hardening of the drawing die to increase! If it is particularly strong, it will cause cracks and fractures in the abrasive!